Can an Impact Driver Be Used for Drywall Jobs?

Share on Facebook
Tweet on Twitter
Can an Impact Driver Be Used for Drywall Jobs

If anyone asks you- “Can an Impact Driver Be Used for Drywall Jobs?”; then you surely can go for the answer- “Yes!”. A handheld impact driver is something that will not only take care of all your drywall operations but also will let you control your work very precisely. Now sometimes questions like- “can I use a drill machine instead of hand impact driver?” may surely arise; but in those cases, you also can go for the “Yes” answer regarding in mind that- drill machines are uncontrollable precisely than that of a hand impact driver. Therefore, in terms of drywall jobs, you should always go for a best impact driver.

What are the drywall jobs?

Sometimes, the term- “Drywall jobs” might indulge you in vain thoughts. In order for your ease and convenience of understanding, just split the word into two separate yet meaningful pieces, that is- “Dry” & “Wall”. This is the elaboration and now you surely might have understood the meaning of it very well. Yes, drywall operation refers to those jobs that are sensitive to the operation to execute on them. Drywall jobs sometimes can be very delicate which cannot but have to be done with the help of a handheld best impact driver.

For example- if you are to nail a portable hanger on a drywall, then using a drill machine to make holes will literally be indecisive. Drill machines typically run at greater rpm (revolutions per minute) and they usually makes the whole specimen to vibrate a lot. This might cause the elasticity of the drywall breach the threshold of its bearable limit and can cause a nasty crack on the total wall. Instead of using drill machines, you can certainly choose a handheld best impact driver. Using an impact driver will let you make the hole for your hanger very slowly yet steadily. Through this, you’ll be able to understand the behavior of the drywall on spot and very clearly.

Things to remember while you are using a best impact driver on drywall jobs:

There are certain things that you ought to bear in mind while you are working on a drywall with a best impact driver. Sometimes, even use of a handheld impact driver can also cause traumatic damages to drywall only due to the lack of knowledge of using the driver perfectly. Therefore, knowledge of usage is truly important. Below are some of the most important points that you ought to bear in mind while working on drywalls-

  1. Start very slow with low torque force: When you have placed your drivers bit on the drywall; make sure that you don’t start driving at great speed. Always put the speed down to very low limits where you can even see the rotation of the bit and trace it. This will help you not to break down or get the drywall cracked at the very first phase of drilling a hole in it.
  2. Make a point on the drill bit about the length of the hole to make: Always refer pointing a spot on the bit before using the impact driver. This will help you to stop at the length necessary. Otherwise, if you make the hole longer than necessary, the drywall might lose its temper and even can cause total breakdown to some worst possible cases. Therefore, think of it as a primary prerequisite before triggering the driver.
  3. Tap on different places and choose the one that creates a stagy sound: Prior to holding your best impact driver on any place on the drywall, it is always recommended to choose the points where the wall is strong. Now, in order to understand the places which are pretty strong than the surrounding, there is a very easy method and that is knocking through fingers. Just knock around the place where you want to drive the hole and listen to the sound. Make a choice of that place where it sounds back with a stagy and strong feel. Through this, you can understand the wall well enough to make a hole and place any screw drivers/plugs etc.
  4. Don’t push the driver hard in the wall: Defer pushing the driver while it is impacting on the wall to make a hole. You might need a longer hole to make but be very steady and push the driver real slow. In order for the hole you are making through the drywall to be straight and firm, you have to make sure that you are moving the driver with low pushing force and low motor driving torque. Unless you do both of these simultaneously, your result will never be like you wanted it.

Some examples of drywall jobs:

You might think of, what a drywall job is through a handheld best impact driver. Below are some of the important tasks that can be drywall jobs-

  1. Drilling holes in wet/dry walls for inserting nails to hang photos.
  2. Drilling nails into dry woods to make joints.
  3. Making holes on ply-woods/ partex/ loose woods to mount lock and key mechanism
  4. Holes for hanging handicrafts/photo frames/ lightweight materials for beautification etc.


Although this is a very little task but in almost every home in this living world, making holes into drywalls is enduring. Sometimes, making holes on drywalls without prior knowledge cause damaging the total wall; which in turn, costs for the total wall again. However, you can surely minimize that cost with a good yet short knowledge on a best impact driver and do whatever you need to do on drywalls at your home or office. If someone asks you- “Can an Impact Driver Be Used for Drywall Jobs?”- Then prior to saying “Yes” directly; refer to spread the importance of such knowledge first and get them; and yourself served as well.