How to Cut Plexiglass with a Jigsaw ?

Share on Facebook
Tweet on Twitter
How to Cut Plexiglass with a Jigsaw ?

When cutting plexiglass you have the choice of utilizing a number of diverse power saws together with a table saw, circular saw, even a router. Another tool you may utilize to cut plexiglass is really a jigsaw. The jigsaw is a little, handheld device that cuts vertically with a right blade positioned. It goes ups and down very fast to make the cut.

This is a good tool for exact cutting and producing curves or angles in a surface area. If you are making a lengthy, straight slice within plexiglass, you should work with a different tool. Nevertheless, if your intent would be to cut the glass into a form or even in a nonlinear style, a best jig saw can be your tool. Remember that the particular thicker the glass, the simpler it really is in order to slice with a jigsaw. Plexiglass comes with a slim, removable brown paper film mounted on both relative sides. When trimming it with a jigsaw, abscond this film on and eliminate once you make the cut.

If a jigsaw is had by you, it is possible to cut Plexiglas. 1 technique to greatly help avoid splintering would be to stay painter’s tape on the cut line. To help keeping the jigsaw from veering right or left on straight cut; work with a clamp-on manual. This can give you a lot more professional look. It may be smart to practice on several scrap bits of Plexiglass first.

Tools Required:

  • Yard stick
  • Grease pen
  • Painter’s tape
  • Goggles
  • Leather gloves
  • Ear connects
  • Mask

5 Steps to Cut Plexiglass with a Jigsaw

Step 01: Clamp the plexiglass to a powerful Surface:

Start off simply by clamping the plexiglass right down to your work bench or even other steady surface area. Leave the finish to become trim hanging on the advantage of the along with a lot of space between it and bench. Use at least 2 clamps, yet use even more if you possibly could.

Step 02: Mark the Lines of the Cut:

Have a Sharpie or some other gun and tag the queue you intend to cut together onto the dark brown film paper. Not merely does this paper safeguard the plexiglass from scratching, it provides an excellent surface area onto which this type of mark could be produced. Draw the total line of the cut through end to get rid of, utilizing a straight edge for just about any segments that want a perfectly straight collection.

Step 03: Safety:

Wear the safety eyeglasses before starting. Plexiglass may chip very easily and also you don’t would like in order to end up getting any little pieces striking you in the eye. Take the jigsaw’s plastic material base and place into place. Place on your security eye protection, natural leather gloves, ear mask and plugs. Place the blade of the jigsaw in the advantage of the trimming collection.

Step 04: Start Cutting:

Start the jigsaw and cut the first couple of centimeters of the Plexiglas slowly. After the first several centimeters, the blade will begin to heat up and can glide more easily across the sheet; when this occurs; it is possible to cut just a little quicker. When you are close to the finish of the slice, grab the overhanging portion of Plexiglas prior to it drops. Usually do not put your hands near the blade.

Connect the jigsaw in to an expansion wire or wall store and make certain the particular cord has gone out from the method. Line up the particular tag on the metallic plate mounted on the particular jigsaw with the center of the collection a person drew on the movie paper. Contain the manual plate smooth contrary to the surface area of the glass and contain the trigger down.

Step 05: Cutting Speed:

Do not make an effort to go as well quick through the cut. Go slowly but assertively. If you want to up back the blade, you might be in a position to do so once the saw is off. Otherwise, transform it on plus back again it away exactly the same method a person went in. A jigsaw can change a sharp arc fairly, but you should arrive at angles through both finishes. The item will fall away once the cuts fulfill at the vertex.

After the plexiglass is cut, take away the film paper and sand any rough edges with nice grit sandpaper. In case you can find any sections which are uneven or even have to be re-cut, the best jig saw can perform the working job.