Hobart Airforce 250Ci Plasma Cutter Review – Super Light, Portable

NOTE: The 250ci has been replaced by the Hobart Airforce12ci. Click the link to see our full review on the 12ci unit.

The Hobart Airforce 250Ci is becoming famous in the plasma cutter industry. It has every one of the elements one could ever request with a plasma cutter, which is still extremely reasonable.

It can slice up to 1/4-inch mellow steel utilizing an electrical bend and compacted air to cut steel and aluminum. Go through our detailed review of this Hobart Airforce 250ci, that will surely help you to realize what the tool can do for you.

hobart 500564
Hobart Airforce 250ci Plasma Cutter
3.53.5 / 5
The machine uses compressed air and an electric arc to make cuts through metal materials. That combo results in a faster and more efficient cut than if you use oxy-fuel.

Pros

  • Cut up to 1/4 inch steel without a problem and have a great smooth cut as well.
  • Input power is 115 VAC, 20 amp so can be powered by any household outlet
  • Features a 7-foot power cord
  • The large button on the torch allows you to easily cut even while wearing gloves
  • The cord of the torch is protected by a rubber sleeve keeping it safe from sparks and metal

Cons

  • Limited Cutting Power

Hobart Airforce 250ci Review

Intended to slice up to 1/8″ mellow steel, the AirForce™ 250ci is fueled by standard family current (115 VAC). An inherent air compressor and lightweight inverter power supply make this plasma cutter the most advantageous, absolutely convenient cutting framework accessible.

The Hobart AirForce 250ci exceeds expectations at cutting sheet metal and 1/8″ mellow steel, and can even disjoint 1/4″ steel.

Hobart Airforce 250ci
Amazon.com

Contrasted with the complexities of an oxy-fuel cutting light framework, plasma cutting is simple.

One of the most loved things about this Hobart plasma cutter is that it remains so natural to set up and utilization. It doesn’t take a great deal of messing around with it to get it up and working.

On the off chance that you take the directions in the container, you will make them keep running right away. It obliges no assembling of any kind and is prepared to go right out of the case.

What I Like of this Hobart Airforce 250ci?

You don’t need to set any kb’s or triggers, simply connect it to and you will be cutting metal in the blink of an eye.

For the individuals who would prefer not to need to manage to get an air compressor, then this is the ideal instrument for you.

Hobart 500564 Airforce 250ci Plasma Cutter with Built-In Air Compressor 120V

You needn’t bother with an air compressor to inspire it to work, because it has an implicit one killing the requirement.

Essentially connect it to the divider, and it will be working right away. No one needs to manage to get an air compressor and so forth, along these lines. This is ideal for individuals who need fitting and go choice.

You can get into almost any spot and not need to stress over the hose keeping you down. Buyers totally cherish Airforce 250ci and can’t get enough of it.

They like how little and smaller it is and how they find themselves able to bring it with them wherever they go.

Read more about Hobart Airforce 500i Plasma Cutter Review

Comparison With Other Products

1
2
3
Lincoln Electric K2185-1 Handy MIG Welder
Hobart Airforce 250ci
Hobart Handler 140 MIG Welder
4.44.4 / 5
3.83.8 / 5
4.44.4 / 5
Welds up to 1/8" mild steelMax Cut: 1/4 in. (6.4 mm inch mild steelWelds 24 ga up to 1/4 in mild steel
Duty cycle - 20% at 70 ampsDuty cycle – 35% at 12 A with 110 VDC,Duty cycle – 20% at 90 amps
26 pounds31 pounds65 pounds
For home repairs and hobby projects on light gauge mild steelGreat for D-I-Y Welding Projectsauto body, household repairs, or even heavier farm projects that require extra welding power

Conclusion

Hobart Airforce 250ci is an extraordinary item for cash. It is little and lightweight and completes almost and work. It is recommended to any individual who is in the business sector for a superb plasma cut.

Hobart 250ci Reconditioned A-Stock AirForce operates with a unique format that you can rely on. It is simple to install and setup. You will not have to bother with the key features of the product.

Hobart 500564
Hobart Airforce 250ci Plasma Cutter
3.53.5 / 5
The machine uses compressed air and an electric arc to make cuts through metal materials. That combo results in a faster and more efficient cut than if you use oxy-fuel.