You are looking for a welding machine for your home-based shop welding job, the Hobart Handler 125 EZ is the best choice for you, let’s read this review to understand more about the key features, pros, cons of Hobart Handler 125 EZ.
The Hobart Handler 125 EZ Flux-Cored Wire Welder (500521) is designed to get you from unboxing to welding as quickly as possible. Operating off a 120-volt household current, the Hobart Handler 125 MIG welder comes with a built-in gas valve and welds up to 3/16″ material.
The company Hobart Welding was established in 1917 based in the US. The company produces a full range of welding and cutting equipment which are used in fields from production or farming to do-it-yourself or maintenance works and Hobart Handler 125 manufactured by this prestigious company.
Introducing Hobart Handler 125 Welder
Product Weight: 57 lbs
Input Voltage : 110/115/120V
Amperage Range: 25A – 130A
Input Phase : 1 Phase
MIG Ready: Yes
Wire Free Speed: Control Infinite
Weld Metals: Steel, stainless steel, aluminum
Weld Thickness: 24 Gauge (0.8 mm) to 3/16 in.
Duty Cycle: 80 Amps @ 25%
Maximum Open Circuit Voltage: 28V (DC)
Shielding Gas Required:No
Current Type: DC
Power Cord: 6 ft.
Product Weight: 28 lbs.
Key Features of Hobart Handler 125 Welder
- A simple to-utilize wire welder
- New single handle controls for straightforward modification
- Simply select item thickness, voltage, and wire food rate is naturally set
- No protecting gas needed; can’t be changed over to protected gas
- Welds 18-gage to 3/16in. gentle steel with .030 self-protecting flux-cored wire
- Typical wear things like drive moves, contact tips, spout, gas diffuser, plasma light tips, cathodes, and weld links are not under guarantee
- There is a motor guarantee
Hobart Handler 125 Review
The Hobart 125 EZ Wire Feed Welder is the least demanding to utilize wire welder ever. Furthermore, inventive new single handle control makes it simple to set up a welder for distinctive material thicknesses.
In addition, the Hobart 125 handler works off 115V family unit current, with no protecting gas needed. It also welds up to 3/16 inches.
The Hobart Handler 125 EZ is a light duty welder that uses flux-cored wire only so you eliminate having to get a tank for shielding gas that most MIG welders require, this is no small savings.
Advantages of Hobart Handler 125 EZ:
Hobart Handler 125 EZ runs on 115-volt current it fits nearly any shop with code-compliant electrical service and wiring. Simply connect the Hobart Handler 125 EZ to the 115V family unit present, select the gentle steel thickness and you start to weld.
The Handler 125 EZ consequently sets itself, wiping out the need to set wire food speed and voltage independently. The Hobart 125 Welder empowers somebody with next to zero welding background to begin creating great welds with insignificant practice.
Only a couple of minutes for set-up and you start to weld. There is a weld set-up aide within the spread to set your welder legitimately. This Hobart 125 handler is incredible for D-I-Y Welding Projects.
Little and versatile, the Hobart 125 EZ functions admirably for open-air welding in light of the fact that there is no need for protecting gas. Use Hobart 125 for welding: garden furniture, trimmer decks, little home repairs, trailer outlines & hitches, wall.
Handler 125EZ with 8 ft. H-9B firearm, 10 ft. work link with a brace, force rope with attachment. Additional .030 contact tips, test spool of .030 spool shaft to suit 4 in spools (discretionary center point pack is accessible for 8 in spools), and proprietor’s manual.
Easy To Set Up And Use
The Hobart 125 has an interesting Single-Knob feature making it a fast and simple wire to set up and use – extraordinary for first-time or learner welders. Furthermore, the manual is given with the machine by the company. The manual has every detail about the machine. Therefore, in order to operate this machine smoothly without any trouble, you should read the instruction manual carefully.
Hobart Handler 125 Welder has three input voltage inputs of 110, 115 and 120V, and has a rated output of 80 amperes at 25%.
Hobart handler 125 Welder weighs 53 pounds, and it has a handle for carrying this machine efficiently. So it’s simple to move this machine and run it anywhere with minimal power supply
The Handler 125EZ is upheld by the Hobart 5/3/1 Industrial Warranty.
Lincoln Electric K2185-1 Handy MIG Welder
Hobart Handler 250ci
Hobart Handler 140 MIG Welder
|Welds up to 1/8" mild steel||Max Cut: 1/4 in. (6.4 mm inch mild steel||Welds 24 ga up to 1/4 in mild steel|
|Duty cycle - 20% at 70 amps||Duty cycle – 35% at 12 A with 110 VDC,||Duty cycle – 20% at 90 amps|
|26 pounds||31 pounds||65 pounds|
|For home repairs and hobby projects on light gauge mild steel||Great for D-I-Y Welding Projects||auto body, household repairs, or even heavier farm projects that require extra welding power|
Read more about Hobart Handler 140: 115V Wire MIG Welder Review
The Hobart 125 EZ is one of the best that you can use today. It also comes with unique features that can help you save money.
Using the product is also with a guarantee. Another amazing thing about the product is that you can buy the Hobart Handler125 at a cheap price.
With respect to its innovative features, you are sure to get the best from the product. Furthermore, Hobart 500521 Handler 125 EZWire Feed Welder gives the best functionality.
So, users will not be disturbed by every notion of the product. In addition, the product is capable of any condition or environment. The best operation of the product can as well noticed when using it for a heavy-duty project.