The SUNCOO plasma cutter is one of the machines which utilize the advanced technology that is electron circuit in its operation.
So, what is it? As we all know, plasma cutting is a process which operates by using an accelerated jet of hot plasma to cut through the electrically conductive materials.
Compared with other machines, plasma cutters use advanced electron circuit when supplying and controlling power.
This machine is designed uniquely and produces a constant current output. The current can also be adjusted depending on the nature of the material to give excellent performance.
It normal situation, this cutter machine has transfer frequency of above 85% and designed with different dynamic characteristics.
Why you should buy the SUNCOO Plasma Cutter?
The SUNCOO plasma cutter is to weld stainless steel, copper, carbon steel, iron, aluminum and other metals. It operates at 40 amps and has a smooth cutting surface which is easy to operate. Furthermore, it operates by inverting the frequency into high frequency, then reduces the voltage to commute current and finally generates a powerful direct welding current using the PWM technology.
Dual Voltage Plasma Cutter
The SUNCOO plasma cutter is made with heavy duty construction and has dual voltage capability of 120V and 230V. It produces a current that ranges from 20-32 amp and 20-40 amp. When operating it ensure that you connect this machine to the right input voltage and avoid overloading.
You should always keep an eye on the maximum duty current which response in regard to the duty cycle selected. Overloading will damage and burn up this plasma machine.
The power voltage is always available in the main technical data and is fitted with the automatic compensation circuit which ensures the welding current is within the allowed range.
If the voltage exceeds the allowance arrangement limit, the components of this cutter will be damaged. You should always take the preventive measures to avoid this situation.
Pressure Gauge of the SUNCOO plasma cutter
The SUNCOO plasma cutter is fitted with LED display and a pressure gauge having easy to use controls. All you have to do is to open the power switch on, and the current volume and pressure will be displayed accordingly.
Adjust the gas pressure to the desired amount and then open the valve of the pressed air. Open the control knob torch, and the electromagnetic valve will start immediately.
Ultra Strong Cutting Ability
With a SUNCOO plasma cutter, cutting metals with high thickness becomes quite easy. It has ultra-strong power which can cut up to a thickness of 4/9” and can cut different kinds of metals.
It performs best when used in an environment with good conditions. The temperature should be within -10 to 40 degrees centigrade and the dampness level should not exceed 80 percent.
You should try as possible not to use this machine in dropping environment or in the sunshine. Also, you should take preventive measures such as not using this machine in a polluted environment.
This cutting machine has 20 inches torch cable with an input capacity of 4.8KVA and output of 96V. It also has a duty cycle of 60% with an efficiency of 85%. When it exceeds the duty cycle, the inter heat-variable component stops working suddenly.
In addition, when using this machine, do not break the circuit immediately as the running fan enables the machine to cool down quickly. When the temperature drops to the allowable range, you can use it again.
Safety when using the SUNCOO plasma cutter
When using the SUNCOO plasma cutter, ensure that the working area is well ventilated. This cutter is usually lightweight and has a compact structure.
The electromagnetic fields produce a high current which the common air flow will not be able to cool down its components. To regulate temperature, they fitted this machine with an axial-flow fan which cools down the machine. You should also note that there is nothing blocking or covering the exhaust shutter.
Never forget that overloading will result in burning up of the components. The cutting current should strictly be according to maximum allowable current when conducting all kinds of duty cycles.
Again, the power voltage should be in line with the main technical data sheet. When the arc supporting frequency gets low, you can get rid of the oxidized film using the abrasive paper.
When you want to maintain plasma cutter, you must turn it off first before opening the house. Use clean and dry compressed air to remove the dust.
If you are operating the machine in the polluted environment; ensure that you remove the dust every day. To avoid damaging the small components of the inter-machine, use pressure under a reasonable arrangement.
When using SUNCOO plasma cutter regularly, you should make sure to tighten the connectors and connect the cable circuit accurately.
You should keep this machine out of steam or water. If, by accident, there is water entering the machine, dry it immediately and check the insulation if it is on point.
• Has simple operation
• Suitable for wide range of application
• Easy to assemble
• Lightweight and compact design
• Strong and durable
• Sometimes it hardens the edges of the material being cut
• Needs to be cleaned and maintained regularly
PRIMEWELD Premium & Rugged Plasma Cutter vs SUNCOO Plasma Cutter
• PRIMEWELD plasma cutter is Cut-50 while SUNCOO is Cut-40
• They are both dual voltage with PRIMEWELD having an input voltage of 110/220 while SUNCOO 120/230V
• PRIMEWELD generates an output of 20-50A while SUNCOO generate 20-40A
• Both have 60% duty cycles
• PRIMEWELD measures 15”x 6”x 12” while SUNCOO is 16.9”x12.4”x7.0.”
• They both have HF oscillating pilot arc
Goplus CUT50 Plasma Cutter vs SUNCOO Plasma Cutter
• Goplus is Cut-50 while SUNCOO is Cut-40
• Both are dual voltage with Goplus using 110-220 input voltage while SUNCOO uses 110-230V
• Both have rated output of 96V
• Goplus has rated output current of 10-50A while SUNCOO has 20-40A
• Both have HF oscillating pilot arc
• The efficiency of Goplus is 80% while that of SUNCOO is 85%
SUNCOO plasma cutter is the best there is for cutting metals either in construction or any other activity. It can cut a variety of metals including the stainless steel, copper, carbon copper and aluminum.
Artisans can also use it to create intricate designs, metal sheet fabrication, automotive, repair, etc. This product has great performance, and you should consider getting one in the market.
You can get this cutter in any welding shop, or you can order it online.
The SUNCOO plasma cutter is one of the best cutting machines with great performance. The creators made this machine with advanced technology to enhance its performance and mainly features a dual voltage operation.
This plasma cutter consists of heavy duty materials and has a duty cycle of 60%. The efficiency of this machine is 85% while it has an output current of 20-40amp.
It is suitable for extensive operations including metal sheet fabrication, automotive work, and repair services. You can decide to go for this cutter machine and enjoy its multi-functional use.